SHOP

New for 2021, the X2 Stealth is effectively a single-wall version of our venerable four-pole geodesic, double-wall X2 Storm. The single-wall design, sitting on the same footprint and using the same poles as the X2 Storm, is 15% wider, has 30% more internal volume, and is 20% lighter.

The Stealth is a completely free-standing design and has an entrance at each end, although the asymmetric shape means the front is larger than the rear. This is a light, spacious and absurdly strong tent.

Features 
Two doors – front and rear
Mesh panel in front door
Central roof vent
Two internal pockets
Diagonal poles inserted through external pole sleeves
Four 3-way guy points
Supplied with 4 x 2 mm Dyneema guylines with mini-Linelok adjusters, 2 m length
Supplied with 6 x alloy pegs, 4 x titanium pegs

Colours

Red
Black

Technical Specifications

People 2
Total weight 2890 g (complete)
Tent body 1885 g
Poles 815 g
Bags, pegs, guys 190 g
Flysheet Waterproof and breathable X-tex
132 g/m², 50 denier, polyester ripstop
20,000 mm hydrostatic head PU/activated carbon
25,000 g/m²/24hr MVTR
Groundsheet 70 g/m², 70 denier, ripstop nylon
10,000 mm hydrostatic head TPU coating
Poles 2 x 9.60 mm Ø DAC Featherlite NSL
2 x 9.00 mm Ø DAC Featherlite NSL
Guylines 4 x 2.00 mm Dyneema with mini-Linelok adjusters, 2 m length
Pegs 6 x 7001-T6 alloy pegs, 12 g each
4 x Titanium pegs, 8 g each
Packed size 45 cm x 20 cm Ø
Made In China

Dimensions

Inner length 225 cm
Inner width 135 cm
Inner height 107 cm

Buy Accessories

The following accessories are available for the X2 Stealth:
Replacement poles
Dyneema guys
Alloy pegs

Care & Maintenance

Storage
Always ensure your tent is completely dry after a trip before packing it away for any length of time. Tents can get stains and mildew if stored in a damp condition – and once these occur, they are almost impossible to remove.

Cleaning
The best way to clean your X1 Raid is simply to pitch the tent and wipe down with a cloth using a warm water and detergent mix. Never machine wash.

Groundsheet cleaning
Wipe down with a cloth using a warm water and detergent mix. Never machine wash – this will cause the PU coating to delaminate.

Poles
Over time, the elastic cord inside the poles may lose its stretch. In this case, unscrew the pole foot at one end, untie the elastic and pull it through until there is sufficient tension. Retie it to the pole foot, cut off the excess elastic and screw the pole foot back in. Don't let go of the elastic or you will find yourself re-threading all the sections!

Product Code: X2-SH-CC

X2 Stealth

£995.00