X1 Strike
£549 / €675 / $675

The X1 Strike is a single-skin tent using our new X-tex fabric. We are hesitant to call the X-tex fabric revolutionary – it still has limitations – but it does present significant improvements and advantages over the existing PTFE-type breathable membrane fabrics that are currently used.

The Strike is built around the same diagonal 2-pole, external pole-sleeve configuration as the X1 Raid, but features a third internal pole to create significantly more space at the head of the tent. This also means more room when it comes to entering and exiting via the door. As on all the X1 models, the guy points loop around the poles themselves, taking stress directly off the seams.

Features 
Third pole for extra headroom
Central roof vent
Mesh panel in door
Eight guy points

Colours

Red
Green
Black

Technical Specifications

People 2
Total weight 1.98 kg (complete)
Flysheet

Waterproof and breathable X-tex
120 g/m², 50 denier, polyester ripstop
10,000 mm hydrostatic head PU/activated carbon

Groundsheet 70 g/m², 70 denier, ripstop nylon
10,000 mm hydrostatic head TPU coating
Poles 3 x 8.64 mm Ø Yunan Ultralite
Guylines 4 x 2.00 mm Dyneema with mini-Linelok adjusters
Pegs 8 x 7001-T6 square-section alloy pegs, 12 g each
Packed size

45 cm x 12 cm Ø

Made In China

Availability

All colours are in stock (Black, Red and Green).

Dimensions

Inner length 210 cm
Inner width 120 cm
Inner height 100 cm

Buy Accessories

The following accessories are available for the X1 Raid:
Footprint
Replacement poles

Care & Maintenance

Storage
Always ensure the tent is completely dry after a trip before packing it away for any length of time. Tents can get stains and mildew if stored in a damp condition – and once these occur, they are almost impossible to remove.

Cleaning
The best way to clean your X1 Strike is simply to pitch the tent and wipe down with a cloth using a warm water and detergent mix. Never machine wash.

Groundsheet cleaning
Wipe down with a cloth using a warm water and detergent mix. Never machine wash – this will cause the PU coating to delaminate.

Poles
Over time, the elastic cord inside the poles may lose its stretch. In this case, unscrew the pole foot at one end, untie the elastic and pull it through until there is sufficient tension. Retie it to the pole foot, cut off the excess elastic and screw the pole foot back in. Don't let go of the elastic or you will find yourself re-threading all the sections!