Single-Skin Shelters

X1 Assault

£949

Including UK VAT.

Delivery and destination taxes are calculated at checkout.

The X1 Assault is built around the same dimensions and pole configuration as the X1 Strike, but with the addition of a porch made from Dyneema laminate (Cuben). This provides a fully sheltered entrance to allow cooking and storage in the porch. Despite the addition of the porch, the Assault is actually lighter than the Strike!

Like its smaller siblings, the X1 Raid and X1 Strike, it is made from our unique X-tex fabric. This uses a coating technology incorporating activated carbon and introduces a new and quite revolutionary means of managing condensation which is greatly superior to conventional breathable membranes. click here

 

THE DETAILS

Know your equipment.

  • Covered porch area
  • Third internal pole for extra headroom
  • Central roof vent
  • Mesh panel in door
  • Two internal pockets
  • Diagonal poles inserted through external pole sleeves
  • Eight guy points
  • Supplied with 4 x 2 mm Dyneema guylines with mini-Linelok adjusters, 2 m length
  • Supplied with 6 x alloy pegs, 4 x titanium pegs
Specifications+
People 2
Total weight 1990 g (complete)
Tent body 1325 g
Poles 485 g
Bags, pegs, guys 180 g
Flysheet Waterproof and breathable X-tex
132 g/m², 50 denier, polyester ripstop
20,000 mm hydrostatic head PU/activated carbon
25,000 g/m²/24hr MVTR
Groundsheet 70 g/m², 70 denier, ripstop nylon
10,000 mm hydrostatic head TPU coating
Poles 3 x 8.50 mm Ø DAC Featherlite NSL
Guylines 4 x 2.00 mm Dyneema with mini-Linelok adjusters, 2 m length
Pegs 6 x 7001-T6 alloy pegs, 12 g each
4 x Titanium pegs, 8 g each
Packed size 45 cm x 15 cm Ø
Made In China
Dimensions+
Inner length 210 cm
Inner width 120 cm
Inner height 100 cm
Porch 75 cm
Care & maintenance+
Storage Always ensure the tent is completely dry after a trip before packing it away for any length of time. Tents can get stains and mildew if stored in a damp condition – and once these occur, they are almost impossible to remove. Cleaning The best way to clean your X1 Assault is simply to pitch the tent and wipe down with a cloth using a warm water and detergent mix. Never machine wash. Groundsheet cleaning Wipe down with a cloth using a warm water and detergent mix. Never machine wash – this will cause the PU coating to delaminate. Poles Over time, the elastic cord inside the poles may lose its stretch. In this case, unscrew the pole foot at one end, untie the elastic and pull it through until there is sufficient tension. Retie it to the pole foot, cut off the excess elastic and screw the pole foot back in. Don't let go of the elastic or you will find yourself re-threading all the sections!